I currently ride a bike and I need couplers. In the end I decided it was better to just get a frame made. I am on my own for the specs, but have come up with the following. Attached is the image of Old/New.
I also want to remove the massive amount of spacers, and instead would like a larger headtube lenght. Also swapping from 26" to 700 x 50.
https://www.bikecad.ca/1672664313639
| Stack | 696.1 |
| Reach | 354.5 |
| Seat Tube Length, C-T | 450 |
| Top Tube Length, Effective/Horizontal HT Top | 550 |
| Top Tube Length, Actual C-C | |
| Top Tube Slope | 31.3 |
| Head Tube Angle | 70 |
| Seat Tube Angle | 74.5 |
| Head Tube Length | 200 |
| Bottom Bracket Drop | 65 |
| Chainstay Length | 480 |
| Front-Center | 635.4 |
| Wheelbase | 1115 |
| Fork Offset/Rake | 45 |
| Fork Length (Axle-To-Crown) | 477.1 |
| Fork Length, Unknown | 475 |
| Standover Height | 770 |