Hello
I recently purchased some rear dropouts from framebuilder supply, but I am not seeing the dropouts I bought modelled in bikeCad. The specific dropouts I bought are the Rear track dropouts with eyelets - plug style - 11mm SS & CS - 66° SS/CS. I am willing to model them myself and input the data into bikecad, but I am wondering if anyone here has already measured these rear dropouts to obtain bikeCAD suitable dimensions.
Thanks for your help everyone.
P.S I am also currently using the free version of bikeCAD, so I am not sure if these dropouts are already modelled in there. It seems from the tutorial that the full version has a much greater dropout selection than the free version.
I don't believe this is currently included, so I've emailed Framebuilder Supply to see if I can obtain a model. I'll include it in the next update if I do.
Thanks Brent, I will see if I can model the dropouts on my own for the timebeing. I have been trying to outline them on graphing paper to get the dimensions needed for BikeCAD.
Also, if you can get back to me if you get a reply I would appreciate it very much.
I've just acquired a model of this dropout and have included it in what will be the next update of BikeCAD.
To plan for this dropout, you can set Sx=16, Sy=35, Sz=9.8, Cx=37.7, Cy=-19.8 and Cz=7.3.
Thanks for the help Brent, this is very helpful of you.