Submit a Standard Component Forum

hi there,

I'm a very happy BikeCAD user.

What is difficult for me is to get the correct measurements of the Enve one piece cockpits in the software.

Any tips/datasets available?

thank you,

Emanuel

Hello

Since I am nearing completion of my first bicycle frame, which is a single speed, I am hoping my next frame will have accomodations for a derauiller. I have been stongly considering using the allotech c210 dropouts, which have plugs like my previous rear dropouts alongside a derauiller hanger. These plugs seem to greatly simplify the process for creating rear stays. I am not seeing the c210 dropouts though in the latest version of BikeCAD, and I am wondering if they can be added.

Thanks for the help<

Hello

I recently purchased some rear dropouts from framebuilder supply, but I am not seeing the dropouts I bought modelled in BikeCAD. The specific dropouts I bought are the Rear track dropouts with eyelets - plug style - 11mm SS & CS - 66° SS/CS. I am willing to model them myself and input the data into BikeCAD, but I am wondering if anyone here has already measured these rear dropouts to obtain BikeCAD suitable dimensions.

Thanks for your help everyone.

Hello, noobs on bicycle here and trying to design my own custom bicycle using BikeCAD.

Does anyone here have a shimano GRX FC-RX810-2 dimension input for BikeCAD?

Hey Folks,

I don't ususally build for wide tires + was having a hard time tracking the actual dims for the following models. I figured I'd share them if ya'll need.

These were measured on a 21mm internal width rim but it should put you in the ballpark.

Maxxis Rekon 29x2.25"

Tire Diameter = 741mm

W = 56mm

M = 28.8

Maxxis Rekon Race 29x2.25"

Tire Diameter = 737mm

W = 55.5mm

M = 27.9

WTB Venture 700x50

Tire Diameter = 720mm

W = 48.5mm

M = 27

Does anyone have a model of PRO's Stealth saddle drawn up, or accurate dimensions of one that they can share?

Info about saddle dimensions in BikeCAD here: bikecad.ca/saddle_dimensions

Thanks very much.

Soren Klingsporn

Hi, has anyone done a brooks B17 saddle dwg to save me time? this saddle has very short rails and the rail are unusualy far forward on the saddle so if you are designing a touring bike where you know for sure the rideer will want toi us e aBrooks, it's wiorth designing for it as the rider will otherwise have to use a 35mm layback post to their ass back the the same place as on other saddles.

Thanks,

Scherrit.

Hello all:

Does anyone have the measurements for a Specialized Power saddle that they could share? We design alot of bikes around this saddle and I'm working on one now and don't have an accurate representation of one saved in my BikeCAD. Of course, I don't have an actual example here either as we're not a Specialized dealer.

Let me know and email or link the file or a design which is using one. Accuracy is appreciated!

Crag

Thanks to Aaron Dunford of Fusion Peak Professional Cycle Fitting in Australia for sharing his large collection of saddles.  Aaron's saddle designs have been included in BikeCAD version 9.15.  In addition to the saddles shown below, Aaron has also contributed several standard wheels, pedals and cranksets.